DIY Jack Skellington Night Light

☠️ DIY Jack Skellington Night Light ☠️ You’ll need: •Round White Push Light •Black Adhesive Vinyl •Transfer Paper •Silhouette Electronic Cutting Machine •Silhouette Tools •Scissors •Jack Skellington Image from Google ☠️🎃☠️ 1) Google the image you want to use for your Jack Skellington light and save it your computer. 2) Open the image in your Silhouette Studio Software and trace the image. 3) Resize the image to the dimensions that will fit your light. For my light, it was 4.173 in. x 3.317 in. If you want, you can also download the Burton’s Nightmare font and add a saying to the light as well. 4) Adjust your cut settings in the software and load the black vinyl into the machine. Cut your image. 5) Once cut, you are going to want to weed the image. 6) Place your transfer tape over the top of the weeded image and apply pressure. 7) Align the image on your light and apply pressure until the image transfers to the light. You can use your finger to smooth down any rough edges of vinyl. 8) Install batteries and turn on the light at night! For more ghoulish fun, check out these Nightmare Before Chistmas themed crafts, recipes, and costumes at: https://kidsactivitiesblog.com/76028/25-the-nightmare-before-christmas-ideas/